FRONT WHEEL REMOVAL

Put the motorcycle in its center stand and raise the front wheel off the ground by placing a support block under the engine. Remove the speedometer cable, front brake adjusting nut, and remove the front brake cable from the brake arm. Remove the axle nut, axle, and the wheel.

Clean the gears and change with a new grease. Check your bearings. Clean your brake shoes and smoothed them with a sandpaper. Check the ovality of brake drum with a caliper.
For installation, reverse the removal procedure and tighten the axle nut to specified torque (6.0 kg-m, 43.5 ft-lb). Adjust the brake and test for free wheel rotation after applying the brakes. Do it for several times.