Normal clutch lever play is approximately 20mm
Pull back the rubber dust cover located at the left handlebar. Loosen the lock nut and turn the clutch cable adjuster. Check the adjustment and tighten the lock nut.
If correct free play cannot be obtained using the cable adjuster, loosen the lock nut at the lower end of the cable and turn the adjusting nut to obtain the specified free play and tighten the lock nut.
Start the engine, pull in the clutch lever and shift into gear. Gradually release the clutch lever and open the throttle. The motorcycle should begin to move smoothly and accelerate gradually.
0 comments:
Post a Comment